V port Ball Valve
homeproductsBonneted Knife Gate ValveManual Bonneted Knife Gate Valve

Manual Bonneted Knife Gate Valve

  • Manual Bonneted Knife Gate Valve
  • Manual Bonneted Knife Gate Valve
Product Introduction
 Size Range:

 DN50~600mm   NPS 2”-24”  (Larger size on reques)

 Max Working Press.:

 DN50~DN250: 10Bar  NPS2~NPS10:150Psi

 DN300~DN450: 7Bar  NPS12~NPS18:90Psi

 DN500~DN600: 4Bar  NPS20~NPS24:60Psi

 Temp. Range:  -29...+800℃
 Seal Tightness:

 According to MSS SP-81

 Body Material:

 Carbon Steel, Stainless Steel, Special Alloy

 Gate Material:
 Stainless Steel, Special Alloy
 Seat Material:

 Stainless Steel+STL

 EPDM (120°C) /Viton(200°C)/PTFE(200°C) /NBR(90°C)

 Face to Face:   MSS SP-81
 Flange Standard:

 GB/T 9113.1, JB/T 79.1, HG 20592, ASME B16.5, EN1092-1

 Appliction:

 Pulp & Paper, Water Treatment, Beverage & Food, Fine Chemical, Power Plant, Steel Industry, etc.

Introduction:

The HAPZ-series Pneumatic Bonneted Stainless Bonneted Knife Valve is a unidirectional knife gate valve with bonnet. The completely enclosed 

body-bonnet structure ensures 0 leakage from the knife gate to surrounding. This valve is very suitable to contaminated/hazardous

media for the safety of surrounding.


Features:

1.    Body

a)   Integral body with full bore structurer ensures smooth flow, easy assembly and smaller shell leakage possibility.

b)   Guide claws design at the port bottom for gate fixture, instead of a groove, eliminates any potential clogging 

       when valve shutoff.

c)   Completely enclosed structure ensures 0 leakage from valve to the surrounding, which is perfect for 

      contaminated/hazardous media for the safety of surrounding.

2.    Gate

a)    Beveled knife edge provides strong cutting stress and tight sealing.

b)    PTFE resilient point guider above the port prevents metal-metal contact between gate and body.

c)    Gate surface is well polished at both sides for tight seal and less jamming. 

d)    Gate is hard chrome coated for better abrasion resistance.


3.    Seat

a)    Side-entry seat is replaceable, reducing the cost of maintenance.

b)    Seat retainer covers the side of seat and prevents seat from direct flow flushing.

c)    Preloaded seat is adjustable to meet different sealing class and compensate normal seat wear.



4.    Other

a)   Double thrust bearing minimizes the operating torque.




No.File NameDownload Link
1Manual Bonneted Knife Gate ValveDownload
Online Inquiry
Related products